 |
|
 |
 |
|
ACCESSORIES
The
LS-30 system includes a full range of accessories, so you can
customize many features of the system.
All the radio
transmitters used in the LS-30 system, except the Remote
Controller, have a unique random code that is set by the
factory, with 16,777,216 combinations in total. Also, with
specially designed transmission timing control, the LS-30
system can effectively prevent mutual interference from other
transmitters in the system. The Remote Controller uses
copy-preventing hopping-code technology, changing its radio
code every time you press the button. The combinations
possible through this hopping-code are up to 7.3 X
1019. To comply with the regulations in most
countries, radio power is limited to below 10mW, and effective
range is about 70 meters measured at open space. The range
may be somewhat less indoors, depending on the layout of
building construction and furniture. This is for all sensors
and accessories.
You may enroll all
the wireless accessories and change their related settings,
either through the guidance of the interactive LCD display on
the Base Unit, or by using a computer with the proprietary
software “HyperSecureLink” through an interface adapter, which
offers a quicker and simpler way to perform the
installation.
All sensors
send “check-in” signal at 60-minute intervals to base unit.
When Tamper or Low Battery condition is detected, it reports
automatically.
|
|
 |
|
 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Detector Type: dual
element
Coverage Angle:
110o
Effective Distance: max. 12 m @ ambient
temp. 25℃
Power: two AAA alkaline
batteries
Current: 18uA @ standby, 20mA @
activation
Estimated Battery Life: 2 years (@ actuated 40 times/day)
Pulse Count: 2 or 4 pulses
selectable
Size: 70.5 x 120 x 45 mm
Weight (w/o
battery): about 85 g
|
|
|
|
| |
|
|
|
|
|
|
Detection: photo-electric
chamber
Sensitivity: meets UL 217
Power: 9V alkaline
battery
Temperature: 0- 50c
Relative Humidity: 10%～85%
Alarm Sound Level: 85dB @ 3
m
Indicator Light: LED flashes every 45 seconds
Low
Battery: Beep every 45 seconds
Current Drain: 6.5uA @
standby, 24mA @ activation
Battery Life: About 2
years
Actuation
Indicator: LED ON, Buzzer ON
Size: W 140 mm x H 45
mm
Weight: about 288 g (w/battery) |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
 Specs.
Power Source: four AAA alkaline
batteries
Current Drain: 4uA @ standby, 36mA @
operation
Estimated battery life: 5 years (@ operating 4
times/day)
Size: 66.5 x
32 x 154.5 mm
Weight (w/o battery): about 124 g
Programmable 4-digit pin.
Backlit
keypad.
Anti-tamper protection.
Panic alert. |
|
|
|
| |
|
|
|
|
|
|
 GSM-30 terminal eliminates
the need for a land-line. Simply insert a sim card and connect
to base unit.
Operates on the mobile network.
Use
it on a boat or anywhere there is no landline. Uses
Siemens TC35i module.
CLICK HERE for more info.
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect
to a power point near the base unit and with cable provided from
the XM10 module to
LS-30 base unit communicates via electrical cables in premises with
appliance modules (AM12) and lamp modules (LM 12) to turn off or
on. Times are programmable.
(Even over the Internet)
|
|
|
|
| |
|
|
|
|
|
 Lamp
module receives an on/off signal from base unit and XM10
controller
|
|
|
|
| |
|
|
|
|
|
Appliance module receives an on/off signal from base unit and
XM10 controller
|
|
|
|
| |
Specs.
Available
April/May
Specs.
Connects to PC
and base unit with cord
supplied.
A wristband device for
emergency help. Transmits a signal to the base unit to display
on LCD and to phone for assistance. 
Comes with
12V/240V adapter and built in back up battery
Ethernet
adapter.
Warns of
high/low temperature and or humidity where installed.
Sensor on
end of cable triggers sender unit if water is detected where
installed